Moin moin,
ich versuche z.Z.zwei CISCO 878 als Bridge einzurichten... Leider war es mir nicht vergönnt 828er zu bekommen.
Folgendes Problem:
Die beiden Router bauen die SHDSL Strecke auf, ich kann aber nicht über die Verbindung Pingen oder Ähnliches. genutzt habe ich 2 WinXP Notebooks (gleiches Sub-Net) welche jeweils mit einem Router verbunden waren.
Hier mal die Config:
Router 1
Controller DSL 0
Mode atm
Line-term cpe
Line-mode 2-wire line-zero
Dsl-mode shdsl symmetric annex A
Line-rate auto
Interface ATM0
No ip Adress
No atm ilmi-keepalive
Pvc 8/35
Encapsulation aal5snap
Dialer pool-member 1
Bridge-group 1
Interface dialer0
No ip address
No ip redirects
No ip unreachables
No ip proxy-arp
Encapsulation ppp
Ip-route cache-flow
Dialer pool 1
Dialer-group 1
No cdp enable
Bridge-group 1
Interface VLAN 1
No ip address
Bridge-group 1
Dialer-list 1 protocol ip permit
Bridge 1 protocol ieee
Bridge cpe
Bridge 1 route ip
No access-list 23
No ip dhcp pool sdm-pool
Router 2
Controller DSL 0
Mode atm
Line-term co
Line-mode 2-wire line-zero
Dsl-mode shdsl symmetric annex A
Line-rate auto
Interface ATM0
No ip Adress
No atm ilmi-keepalive
Pvc 8/35
Encapsulation aal5snap
Dialer pool-member 1
Bridge-group 1
Interface dialer0
No ip address
No ip redirects
No ip unreachables
No ip proxy-arp
Encapsulation ppp
Ip-route cache-flow
Dialer pool 1
Dialer-group 1
No cdp enable
Bridge-group 1
Interface VLAN 1
No ip address
Bridge-group 1
Dialer-list 1 protocol ip permit
Bridge 1 protocol ieee
Bridge cpe
Bridge 1 route ip
No access-list 23
No ip dhcp pool sdm-pool
Und das Ergebnis von show running_config Router 1:
Current configuration : 5105 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router1
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-2030847454
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2030847454
revocation-check none
rsakeypair TP-self-signed-2030847454
!
!
crypto pki certificate chain TP-self-signed-2030847454
certificate self-signed 01
3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32303330 38343734 3534301E 170D3032 30333031 30303530
32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 30333038
34373435 3430819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100AD28 087BF740 9D774FB0 1D487E18 B829797D FA7F60D0 704E4415 1BE5AA25
ADAE7D5F 1E6E19CD 5B2867D3 ED6E9D53 3D56ED29 179CB8B1 AE264558 64FF7D4E
2740BC1C 2EE86032 A550211D 79C32810 B851C461 083D2C3B F3CEDD46 93B4750D
02955085 043F6D5D AD828ED2 820CE730 EAD0BE96 0DACAE51 65C05BCA 56068153
9FBB0203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF 30210603
551D1104 1A301882 16726F75 74657231 2E796F75 72646F6D 61696E2E 636F6D30
1F060355 1D230418 30168014 327FAC11 95A88C24 D8E6CD90 CAB1148F 2E569734
301D0603 551D0E04 16041432 7FAC1195 A88C24D8 E6CD90CA B1148F2E 56973430
0D06092A 864886F7 0D010104 05000381 81002394 FCA27E04 D2804363 DD301221
3D9B5A70 7E2DB258 AE48CD13 F43AE93C 5D8163DE A1A0ED8C 1836F9AE EDC4C373
16308F1D C37706A4 FBD672B4 5A1CB41A 90913D08 881DDF97 D24FA9EE AC527AB1
D12767A5 3032BB5D 12F10FC3 61F72273 B8F4000D 735C2D17 B6464BBE 879A0E5C
D0CEDA2F A0508A8D 7E33C261 63D29448 1F89
quit
dot11 syslog
ip cef
ip dhcp excluded-address 10.10.10.1
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip domain lookup
ip domain name yourdomain.com
!
!
!
username admin privilege 15 secret 5 $1$a3bL$DSbgyOx17.xYWJ7vuBlo61
!
!
archive
log config
hidekeys
!
!
controller DSL 0
mode atm
line-term cpe
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex A
line-rate auto
!
!
bridge crb
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
!
bridge-group 1
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 150.163.6.11 255.255.255.0
ip tcp adjust-mss 1452
bridge-group 1
!
interface Dialer0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
bridge-group 1
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
dialer-list 1 protocol ip permit
no cdp run
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device and
it provides the default username "cisco" for one-time use. If you have already
used the username "cisco" to login to the router and your IOS image supports the
"one-time" user option, then this username has already expired. You will not be
able to login to the router with this username after you exit this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
Show running_config Router2
Current configuration : 5061 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router2
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-1874718307
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1874718307
revocation-check none
rsakeypair TP-self-signed-1874718307
!
!
crypto pki certificate chain TP-self-signed-1874718307
certificate self-signed 01
3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383734 37313833 3037301E 170D3130 30333039 31373530
34365A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38373437
31383330 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100DC6B 5FD61B6D 62F9C02A FF03E52F 763B207C 9F1D136C 249A7012 32DE3B77
DB971BBC 8A676F1C D1E0DF35 D95BBE94 AEB0325E DEACD329 45993C6D 27883AB8
43F1F5F8 E8BE9A30 26F0ED2D FBF46057 6115A5A7 A970ACDC 7A3D5ADE C1E4B166
61AEBAF3 9643DB94 1694F1CD 568DFE88 1211EEF2 34FE527D F7DE337B 61636633
70E10203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF 30210603
551D1104 1A301882 16726F75 74657232 2E796F75 72646F6D 61696E2E 636F6D30
1F060355 1D230418 30168014 6E1254E1 0AD2BE43 EB921E09 F3BD653F BAF14A28
301D0603 551D0E04 1604146E 1254E10A D2BE43EB 921E09F3 BD653FBA F14A2830
0D06092A 864886F7 0D010104 05000381 81001D91 9A6DFDBD 1A34A6A8 CD1A4A4C
C8CDD358 3C412293 607B0C97 53FF08E4 6B99FF00 E9BF87A2 88EDEAAF 9F3BB304
64A25E9E 7FE014F3 D5BAF8B5 1A3CBF67 0DF88D3F DF5F1C05 4F3BC071 D539414F
7A47C752 36F2039D 9376BA72 3DA7A611 B31339BB 8B5BED67 BFAE3A99 FD5CF3B9
92CDEE7C 6C4AE123 309F6197 57C60F7A 2B5C
quit
dot11 syslog
ip cef
ip dhcp excluded-address 10.10.10.1
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip domain lookup
ip domain name yourdomain.com
!
!
!
username admin privilege 15 secret 5 $1$gjJQ$p8SM0DHhJ2Tb8Cww6.9d2.
!
!
archive
log config
hidekeys
!
!
controller DSL 0
mode atm
line-term co
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex A
line-rate auto
!
!
bridge crb
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
!
bridge-group 1
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
no ip address
ip tcp adjust-mss 1452
bridge-group 1
!
interface Dialer0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
bridge-group 1
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
dialer-list 1 protocol ip permit
no cdp run
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device and
it provides the default username "cisco" for one-time use. If you have already
used the username "cisco" to login to the router and your IOS image supports the
"one-time" user option, then this username has already expired. You will not be
able to login to the router with this username after you exit this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
Vielen Dank für Eure Hilfe
